Kenmore 790.7754 - Manual (Page 35)

Seif-Cleaning
Setting Flex Clean or Delay Flex Clean
INSTRUCTIONS
When the Seif-Clean cycle is done:
PRESS
1 .
2
.
The time of day, "HOT ", "DOOR LOCKED " and " CLEAN " icon
will remain in the display (See Fig. 7).
Once the oven has cooled down for approximately 1 HOUR, and
the
""DOOR LOCKED"" icon is no longer displayed, the oven
door can then be opened.
DISPLAY
30 Hot
Fig.7
J
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
2. Once the oven has cooled down for approximately 1 HOUR and
the ""DOOR LOCKED"" icon is no longer displayed,the oven door
can then be opened (See Fig. 8 ).
Fig.8
IMPORTANT NOTES when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON (if equipped).
2. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see the instructions to set the control for the 24 hour
time of day display mode.
35