Instructions, When the set bake time runs out, Press – Kenmore 790.7754 User Manual
Page 23: Display, L-dn, Setting oven controls, Dcdco), Ijn iju, I j u, I j n
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The
BAKE
(
b
^,
OVEN COOK TIME
(|^ and
DELAY START
(f^ pads control the
Delay Start
feature. The
automatic timer of the
DELAY START
feature will turn the oven ON and OFF at the times you select.
Setting Oven Controls
• Setting Delay Start
Setting Delay Start
INSTRUCTIONS
To program the oven for a Delay Start and to shut off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
1 .
2
.
3.
4.
Be sure that the clock is set with the correct time of day.
Arrange interior oven rack(s) and place the food in the oven.
Press
( ^ ) (See Fig. 1)
Enter the desired baking time using the number key pads by
pressing
(See Fig. 2). Note: Baking time may be
set for any amount of time from 1 minute to 11 hours and 59
minutes.
5.
6
.
Press
(See
Fig.
3).
Press
(S) (See Fig. 4).
7. Enter the desired start time using the number pads
(DCDCo)-
8 . Press . (See Fig. 6 )
9. Press (sal^ . (See Fig. 7)
10. Press
.
11. Press (See Fig.
8 )
Note: Once
Delay Start
has started, press
to display the
bake time remaining. Once the
Delay Start
has started baking, a
long beep will sound when the oven temperature reaches the set
temperature.
Press when baking has finished or at any time to cancel the
Delay Start
feature.
When the set bake time runs out:
1
. "End"
will show in the display. The oven will shut off
automatically (See Fig. 9).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until is pressed.
PRESS
3
) C T ) (
5
DISPLAY
Fig. 1
Fig. 2
Ijn
Iju
Fig.3
Fig. 4
5-30
Fig. 5
l-Dn
I J U
Fig. 6
i j n
I J U
Fig. 7
I j n D i e
I J U J I J
Fig.
(?-(?0
E n d
Fig. 9
NOTE: If your clock is set for normal 12 hour display mode the
Delay Start
feature can never be set to start more than 12
hours in advance. To set the
Delay Start
12-24 hours see the instructions to set the control for the 24 hour time of day
display mode.
23