Burner tube must fit over valve orifice as shown – Kenmore 16238 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Front View

22. Attach side burner assemblies using shelf mounting procedures
as previously described. (Steps 14 & 15)

23. After attaching side burner base assembly to shelf mounting
brackets insert side burner valve into burner tube of side burner as
shown.

#10

1/2

Phillips
Screws

24. After inserting valve orifice into burner tube,
attach shelf trim using (3) #10 x 1/2 phillips screws.
(Steps 16 & 17)

Burner tube must fit over valve orifice as shown.