Kenmore ELITE 790.7943 - Manual (Page 30)

Self-Cleaning
Setting Flex Clean or Delay Flex Clean
INSTRUCTIONS
When the Self-Clean cycle is done:
1. The time of day, "HOT", "DOOR LOCKED" and "CLEAN" icon
will remain in the display (See Fig. 7).
2. Once the oven has cooled down for approximately 1 FIOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened.
PRESS DISPLAY
' ^ G H oil
Fig.7
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press
2. Once the oven has cooled down for approximately 1 FIOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (See Fig. 8).
Fig.8
IMPORTANT NOTES when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
3. If a Self-Cleaning-Cycle has started but notfinished and a power failure occurs, the appliance may be thoroughly
cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the
24 hour time of day display mode.
30