Setting oven controls, Instructions, Press – Kenmore ELITE 790.7943 User Manual

Page 24: Display, To set add 1 minute feature, Setting add 1 minute feature, 30 end, N /zj dc'rii

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Oven Controls

•

Setting Convection Convert Feature

•

Setting Add 1 Minute Feature

To set the Convection Convert feature

The

CONV CONVERT

pad is used to automatically convert a standard

Baking

recipe for convection baking. When

set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.

Convection Convert

MUST

be used with a

Convection Bake

keypad. Cook Time or Delay Start functions may be added.

INSTRUCTIONS

Using Convection Convert feature to adjust oven

temperature from a Bake recipe (example below
when setting oven for 350°F):

1. Arrange interior oven racks and place food in oven.

PRESS

'COnW'

‘ Bake '

Convert

Press (sake), (See Fig. 1). If a

Cook Time

or a

Delay Start

is desired, enter the times now.

Press .

"CONV BAKE"

and the oven set temperature

adjustment

will appear in the display (for this example it is

325°F). A beep will sound once the

adjusted

oven set

temperature is reached. (See Fig. 2).

Notes:

When used with a

Cook Time

or a

Delay Start

setting,

the

Convection

Convert feature will display a

"CF"

for check food

when the bake time is 75% complete (See Fig. 3). At this time the
oven control will sound 3 long beeps at regular intervals until baking
has finished. When the bake time has completely finished the
control will display

"End"

and will sound 3 long beeps every 30

seconds until the (^) pad is pressed (See Fig. 4).

The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)

Press (^) to stop

Convection Bake

or cancel

Convection Bake

at any time. Please allow the convection fan up to

6 minutes

activate. When the convection fan activates, a rotating fan icon will
appear in the display (See Fig. 2).

Note:

The minimum amount of cook time using the Convection

Convert feature with a

Cook Time

or a

Delay Start

function is 20

minutes.

DISPLAY

m35ff

Fig. 1

n /ZJ DC'rii

u jEj m

Fig. 2

3 0

Fig.3

30 End

Fig. 4

To Set Add 1 Minute Feature

The

keypad is used to set additional minutes to the Timer. Each time the

pad is pressed, another minute is

added. If the Timer is not active and the key pad is pressed, the Timer feature will become active and will begin

counting down from

minute. When the Timer reaches the end of the set time,

“End”

will display and signal 3 long beeps

at regular intervals until ("liSwO is pressed again.