Kenmore 415.1615111 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
Sideburner Valve, Sideburner, Sideburner Bezel, Ignitor Wire, Control Knob
□ Position valve behind fascia and line up holes (A).
□ Insert (1) of the #8-32x3/8” stainless steel screws, but do not fully tighten.
□ Slip bezel under inserted screw and position as shown (A).
□ Line up other hole and insert (1) #8-32x3/8” stainless steel screw through bezel and into valve.
□ Tighten both securely.
□
Place sideburner into shelf (B). Make sure to insert valve into sideburner tube. Attach sideburner with
(1) wing nut (
C).
Under sideburner shelf, install sideburner clip to sideburner tube and valve. Attach
sideburner ignitor wire to electrode as shown (D).
□ Place grate onto sideburner shelf (E). Press control knob onto sideburner valve stem (F).
Sideburner Valve
Burner Clip
Correctly assembled burner-to-valve engagement
Sideburner
Sideburner Valve
Control Knob
#8-32X3/8”
Stainless Steel Screw
Qty. 2
teg
Wing Nut
Qty. 1
Insert this tip into
hole in bottom of
sideburner tube /f
Clip around
sideburner
valve
464220311 • 19