Kenmore 122.1613411 - Manual (Page 12)

3. Side Burner & Side Shelf Assembly
(a) Attach side shelf and front panel (O) together using
(2) 5/32
X 8mm Phillips head screws (CC) with (2) 5/32
lock washers (GG). (Fig. 9)
(b) Attach side burner shelf and front panel (N) using
(2) 5/32
X 8mm Phillips head screws (CC) with (2) 5/32
lock washers (GG). (Fig. 10)
(c) Loosen (2) preinstalled 1/4 x 10mm Phillips head
screws and (2) % lock washers from right side of grill
head (A) as shown. Do not screw out fully; leave %
extended for shelf assembly. (Fig. 11)
(d) Through side burner shelf keyholes, hang side
burner shelf (N) on two loosened screws. (Fig. 12)
(e) Using (2) 1/4 x 10mm Phillips head screws (BB) and
(2) 1/4 flat washers (EE), attach side burner shelf (N) to
grill head from inside the firebox. Insert (1) 5/32 x 8
mm Phillips head screws (CC) and (1) 5/32 lock
washers (GG) to attach the side burner shelf front panel
to the control panel (Fig 13).Fully tighten the two
loosened screws to secure shelf to firebox.
(f) Repeat steps (c) through (e) to install side shelf.
Fig.10
N
12