Kenmore ELITE OASIS 110.6703 - Manual (Page 21)

Auto Preset Cycle Settings
Follow care label directions.
Auto Dry Cycles
Load Type
HEAVY DUTY
Heavyweight mixed
loads, cottons, jeans
Temperature Time*
(Minutes)
High 50
COTTON/TOWELS High
Towels, sheets, cottons
45
NORMAL
Corduroys, work clothes
Medium 40
CASUAL
Business casual clothes,
permanent press,
synthetics
Low 35
DELICATE
Lingerie, blouses,
washable knit fabrics
Extra-Low 25
* Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.
TIMED CYCLES
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the TIME ADJUST (More Time or Less Time)
buttons. See “Changing Cycles, Modifiers and Options.”
NOTE: Timed Cycles may also be used with the dryer rack. See
“Dryer Rack.”
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as blankets and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature setting.
EXPRESS DRY™
Use this cycle for drying small loads or loads that need a short
drying time.
Timed Preset Cycle Settings
Auto Dry Cycle Modifiers
Use the Dryness Level Modifier to select dryness levels for the
Auto Dry Cycles. Press Dryness Level until the desired Dryness
Level setting illuminates.
The preset dryness setting is Normal when an Automatic Cycle is
selected. You can select a different dryness level, depending on
your load, by pressing Dryness Level and choosing More, Normal
or Less. Selecting More, Normal or Less automatically adjusts
the dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
NOTE; Dryness Level selections cannot be used with the Timed
Cycles.
o
Dryness
Level
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the
Timed Cycles. Press Temperature until the desired temperature
setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
■ '■ High
. ' Medium
i.' Low
■ Extra Low
Air Dry
Temperature
Air Dry
Use the Air Dry Modifier for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Dry.
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Load Type Temperature (Minutes) Plastic - Shower curtains, tablecloths 2 0 - 3 0
TIMED DRY
Heavyweight, bulky items,
High 40 Rubber-backed rugs 4 0 - 5 0
blankets, work clothes
Olefin, polypropylene, sheer nylon 1 0 - 2 0
EXPRESS DRY™
Small loads
High 23
"Default times are remembered from the previous cycle.
* Reset cycle to complete drying, if needed.
When using Air Dry
■ Check that coverings are securely stitched.
■ Shake and fluff pillows by hand periodically during the cycle.
■ Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Dry is not available with Auto Dry Cycles.
21