beautypg.com

Dryer use, Starting ybyr dryer – Kenmore HE2 110.9758 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

mrmimmmm/i

DRYER USE

S

tatus

Wet

Damp

Cool Down

Clothes Dry

Wrinkle Guard

Controls Locked

Check

Uni

Screen

AUTO

C

ycles

Delicate

MODIFIERS & OPTIONS

Temperature

ACjusisriMir^craHi.

O

:: Wrinkle Guard 90

m

: Cycle Signal

Starting Ybyr Dryer

w

M

Explosion Hazard

Fire Hazard

Keep flammable materials and vapors, such as

No washer can completely remove oil.

gasoline, away from dryer.

Do not dry anything that has ever had any type of oil on

Do not dry anything that has ever had anything

it (including cooking oils).

flammable on it (even after washing).

Failure to follow these instructions can result in death.

Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.

explosion, or fire.

Failure to follow these instructions can result in death

or fire.

Follow these basio steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.

1.

Clean lint screen before each load. See “Cleaning the Lint

Screen.”

2. Place laundry into dryer and shut door.

3. Press POWER.

4.

Select an Auto or Timed Cycle. The preset settings for Auto

or Timed Cycles will Illuminate. The estimated (auto cycle) or
actual (timed) cycle time (in minutes) will show in the display.

NOTE: A default time is displayed when an automatic cycle is
selected. During the first few minutes of the drying process,

the cycle time may automatically vary from the default time

based on the size and fabric type of the load. Toward the end
of the drying process, the estimated time display will adjust
again, showing the final drying time.

To use an Auto Cycle

■ Select an Auto Cycle. Auto cycles are preset to Normal.

■ Select DRYNESS LEVEL to adjust how dry you want the

load. As the cycle runs, the control senses the dryness of

the load and adjusts the time automatically for the

selected dryness level.

To make changes to the Dryness Level and/or Options
during an Auto Cycle:

■ Press STOP once.

■ Adjust Dryness Level and/or Options.

NOTE: Dryness Level selections can be made only while
using Auto Cycles. Selecting More, Normal or Less
automatically adjusts the sensed time needed.

Dryness

Level

AUTO CYCLES ONLY

Auto Dry cycles take the guesswork out of drying time
and enhances fabric care. The amount of time that is
displayed is the estimated time remaining in the cycle.

16

This manual is related to the following products: