Kenmore ELITE OASIS Steam 110.6808 - Manual (Page 23)

Auto Dry Cycle Modifiers
Use the Dryness Level Modifier to select dryness levels for the
Auto Dry Cycles. Press Dryness Level until the desired Dryness
Level setting illuminates.
The preset dryness setting is Normal when an Auto Dry Cycle is
selected. You can select a different dryness level, depending on
your load, by pressing Dryness Level and choosing More, Normal
or Less. Selecting More, Normal or Less automatically adjusts
the dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
NOTE; Dryness Level selections cannot be used with the Timed
Cycles.
Dryness
Level
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for the
Timed Cycles. Press Temperature until the desired temperature
setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto Dry
Cycles.
■■■■ High
№dium High
■ Medium
"■ Low
, Extra Low
Air Dry
Temperature
ADJUSTS TIMED CYCLES
ONLY
Air Dry
Use the Air Dry Modifier for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Dry.
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 2 0 - 3 0
Plastic - Shower curtains, tablecloths 2 0 - 3 0
Rubber-backed rugs 4 0 - 5 0
Olefin, polypropylene, sheer nylon 1 0 - 2 0
*Reset cycle to complete drying, if needed.
When using Air Dry
■ Check that coverings are securely stitched.
■ Shake and fluff pillows by hand periodically during the cycle.
■ Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Dry is not available with Auto Dry Cycles.
You can customize your cycles by selecting options.
OPTIONS
Drum Light
Damp Dry Signal
AU'IOCrCI rSONlY
. Wrinkle Guard 150
Drum Light
Select Drum Light to turn on the light inside the dryer drum.
During a cycle, if Drum Light is selected, the drum light turns on
and will remain on until DRUM LIGHT is pressed again, the door
is open and closed, or the door is left open for 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The DAMP DRY SIGNAL is useful when drying bedsheets/linens
in a mixed load. When the signal goes off, open the door to stop
the dryer, rearrange the load inside the dryer, close the door and
restart the dryer to finish the drying cycle. Rearranging the load
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the Auto Dry
Cycles,
WRINKLE GUARD® {30,60, 9 0 , m i n u t e s )
WRINKLE GUARD® helps keep wrinkles from forming when you
cannot unload the dryer promptly at the end of a cycle. During
this option, the dryer stops tumbling and then tumbles again for a
brief period.
■ Press WRINKLE GUARD® to get heat-free, periodic tumbling
at the end of a cycle. WRINKLE GUARD® periodically starts
and stops the dryer, tumbling the load without heat tor 30, 60,
90 or 150 minutes (depending on your model) unless you
open the dryer door.
■ Stop WRINKLE GUARD® at any time by pressing WRINKLE
GUARD®, opening the dryer door or pressing STOP.
■ The Auto Dry and Timed Dry Cycles will retain the WRINKLE
GUARD® setting. For example, If you select WRINKLE
GUARD® in the Normal cycle, WRINKLE GUARD® will be on
the next time you select the Normal cycle.
NOTE: If you do not select WRINKLE GUARD®, the dryer stops
after cool down.
Tiai
Cycle Signal
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL VOLUME until the desired volume (Loud or
Soft) is selected. On some models, press CYCLE SIGNAL to turn
the Cycle Signal On or Off.
23