Kenmore ELITE OASIS Steam 110.6808 - Manual (Page 21)

■ Drying temperature and dryness level are preset when
you choose an Auto Dry Cycle. You oan select a different
dryness level, depending on your load, by pressing
Dryness Level and choosing More, Normal or Less.
NOTE: You cannot use the Time Adjust and you oannot
choose a Temperature with the Auto Dry Cycles.
■ If you wish to adjust the cycle length ot a Timed Cycle,
press the Time Adjust {More Time or Less Time) arrows.
Adjust the temperature of a Timed Cycle by pressing
Temperature until the desired temperature is selected.
NOTE: You cannot choose a dryness level with Timed
Cycles.
: ■
Follow the progress of your dryer with the drying Status indicator
lights.
STATUS
Wet
Damp
Cool Down
Clothes Dry ,i
Wrinkle Guard :
Check litri Screen @
Wet
The Wet light illuminates at the beginning of an Auto Cycle if a
wet item is detected.
■ In an Auto Cycle, If a wet item is not detected after
approximately 5 minutes, the dryer goes directly Into Cool
Down and the Cool Down and WRINKLE GUARD® indicators
illuminate, if selected.
■ In a Timed Cycle, wet items are not detected. The dryer will
continue to run for the length of time selected, and the Wet
light will illuminate. The damp light will not illuminate.
Damp
The Damp light illuminates in an Auto Dry Cycle when the laundry
is approximately 80% dry. Damp Dry Signal beeps, if selected.
See “Options.”
Cool Down
The Cool Down light illuminates during the cool down part of the
cycle. Laundry cools for ease in handling.
Clothes Dry
The Clothes Dry light illuminates when the drying cycle is
finished. This indicator stays on during WRINKLE GUARD®.
WRINKLE GUARD®
The WRINKLE GUARD® light illuminates when this option is
selected. This indicator stays on during WRINKLE GUARD®.
Check Lint Screen
The Check Lint Screen light reminds you to check the lint screen.
The light illuminates when the user selects a cycle. It goes out
when the door is opened, Start is pressed, or after 5 minutes
elapses.
Indicator lights
Other indicator lights show Cycle, Options, Modifiers and Cycle
Signal settings selected. The display shows the estimated or
actual time remaining.
Select the drying cycle that matches the type of load you are
drying. See Auto or Timed Preset Cycle Settings charts.
A uto D ry C ycles
Normal
Express
Dry
TIMED C ycles
Touch
Up
Bulky/
Bedding
Ultra
Delicate
Refresh
• STEAMCARE
Auto Dry Cycles
Auto Dry Cycles allow you to match the cycle to the load you are
drying. See the following Auto Preset Cycle Settings chart. Each
cycle dries certain fabrics at the recommended temperature. A
sensor detects the moisture in the load and automatically adjusts
the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads,
cottons and jeans.
Cotton/Towels
Use this cycle to get high heat for drying heavy fabrics such as
towels, sheets or cottons.
Normal
Use this cycle to get medium heat for drying casual business
clothes, permanent press blends or work clothes.
Bulky/Bedding
Use this cycle to get medium heat for drying large items that
require very long drying times such as jackets, comforters and
cotton or polyester fiber filled pillows. Rearrange the load when
the Damp Dry signal sounds. This step will aid in the drying
process.
Ultra Delicate
Use this cycle to get extra-low heat to gently dry items such as
washable knit fabrics, blouses or lingerie.
21