Auto preset cycle settings, Steamcare preset cycle settings, Steamcare cycles – Kenmore ELITE OASIS Steam 110.6808 User Manual
Page 22: Refresh, Touch up, Timed cycles, Timed dry, Express dry
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Preset Cycle Settings
Follow care label directions.
SteamCare Preset Cycle Settings
Auto Dry Cycles
Load Type
Temperature
Time*
(Minutes)
HEAVY DUTY
Heavyweight mixed loads,
cottons, jeans
High
50
COTTON/TOWELS
Towels, sheets, cottons
High
45
NORMAL
Casual clothes,
permanent press
Medium
40
BULKY/BEDDING
Jackets, comforters,
cotton or polyester fiber
filled pillows
Medium
60
ULTRA DELICATE
Extra-Low
25
Washable knits, blouses,
lingerie
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on ioad type and load size.
SteamCare Cycles
Use SteamCare Cycles to help smooth out wrinkles from dry
items, such as clothes that have been worn or clothes that have
been left in the dryer too long. When a SteamCare Cycle is
selected, the estimated time remaining display shows the actual
time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Use of a fabric softener sheet is not recommended with
steam cycles as it may cause temporary staining on the
clothes.
Refresh
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free
cotton, cotton-polyester blend, common knits and synthetic
garments. In this cycle a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The
dryer will continue to tumble with heat followed by a brief cool
down. The heat level and cycle time are not adjustable.
Touch Up
This cycle is best for touching up clothes that have been left in
the dryer too long. In this cycle, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. The dryer will continue to tumble with heat followed by
a brief cool down. The dry time and temperature can be adjusted
for this cycle.
NOTE: Overloading the dryer may not yield the same results.
Timed Cycles
Load Type
Default
Temperature
Default Time
(Minutes)
REFRESH
Helps to smooth out
wrinkles and reduce odors
from loads consisting of
one to four dry items.
Medium High 15
Touch Up
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
Medium High
20
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and
a drying temperature. When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the TIME ADJUST (More Time or Less Time)
buttons. See “Changing Cycles, Modifiers and Options.”
NOTE: Timed Cycles may also be used with the dryer rack. See
“Dryer Rack.”
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as blankets and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature setting.
EXPRESS DRY™
Use this cycle for drying small loads or loads that need a short
drying time.
Timed Preset Cycle Settings
Timed Cycles
Load Type
TIMED DRY Heavyweight,
bulky items, work clothes
Default
Temperature
__
Default Time*
(Minutes)
40
EXPRESS DRY™
Small loads
High
23
‘Default times are remembered from the previous cyole.
22