Handle mounted, Attachments, To use attachments – Kenmore 631 User Manual
Page 8: Warning, Attachments -10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
_________________
Release the handle by pressing down on
the handle release pedal with your foot
and pulling back and down on the handle
with your hand.
Handle
Release
Pedal
HANDLE MOUNTED
SOME MODELS
To start the vacuum cleaner, slide the
On/Off switch from the OFF position to
the ON position. To stop the vacuum
cleaner, slide the On/Off switch to the
OFF position.
ATTACHMENTS
Crevice
Tool
Telescoping
Wand
Dusting
Brush
Combination
Brush
Identify each of the attachments shown
above,
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR
section.
When returning the bare floor selector to
the carpet setting, use caution as the
selector can move quickly to that setting
due to tension created by the belt.
Remove the lower end of the stretch hose
from the cleaner by grasping the hose
collar, twisting and pulling straight out.
The attachments can now be added to
the hose.
NOTE:
The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow by the
attachments themselves or by new carpet
fuzz filling the bag quickly. See the
TROUBLESHOOTING section.
A
WARNING
Electricfil Shock And PersonaJ Injury
HazattI
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from cleaner
suddenly starting.