Warning, To remove light bulb, Caution – Kenmore 631 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
senricing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from cleaner
suddenly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrica!
outlet.
Slide latches
outward and
remove noz
zle cover
A
CAUTION
Do not use a bulb rated over 15W
(130 V). During extended use, heat
from the bulb could overheat sur
rounding plastic parts.
Remove the
light bulb by
pushing the
bulb in while
turning coun-
terciockwise
to release
from the
siot.Then pull
the light bulb
straight out.
To replace the
light bulb care
fully insert and
turn clockwise
to securely fit
into slot.
NOTE:
See PARTS AND FEATURES for
bulb number.
A
CAUTION
Do not plug in or turn on until the
vacuum is completely reassembled.
Replace the
nozzle cover
and secure the
latches.
20