O load the dryer, Clean the lint filter, Turn on the dryer – Kenmore ELITE 796.8051 User Manual
Page 19: Select a cycle, Select cycle modifiers, Select cycle options, Begin cycle, O end of cycle, Loading the dryer, Cleaning the lint filter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW TO USE
OPERATING THE DRYER
POWER
Normal
Small Load |
Wrinkle
j 1
Damp Dry
Bulky/Bedding
Délicates
Casual
Express Dry
"f 1
Medium 1
Heavy Duty
' /
Touch Up
• 1
Low 1
Sanitize
Air/Rack Dry i
Temp 1 1
O
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If
the load is extra large, you may need to divide it into
smaller loads for proper performance and fabric care.
&
O
o
CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the
filter and remove the lint from the last load. This will
help ensure the fastest and most efficient drying perfor
mance.
TURN ON THE DRYER
Press the POWER button to turn on the dryer. The
cycle LEDs will illuminate and a chime will sound, if
turned on. Refer to page 18.
SELECT A CYCLE
Turn the Cycle Selector Knob either direction until the
LED for the desired cycle is on. The preset tempera
ture, dry level, and option settings for that cycle will be
shown. Refer to page 20.
(/}
□
O
z
UJ
High
ÿ Extra Dry
1 60
•
1 ’
1 50
Medium
= Normal
1 40
•
1
•
1 30
Low
I
Damp Dry
1 20
Temp
Dry Level
Loud
Soft
Off
Timed Dry
Chime
Wrinkle
Guard
Control Lock
START/PAUSE
Drum Light
More Time
less Time
My Cycle
■ Status ■
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be
changed if desired. This can be done using the cycle
modifier buttons as shown on page 23 (temperature,
dry level, and chime).
NOTE: Not all options or modifiers are available on all
cycles. A different chime will sound and the LED will not
come on if the selection is not allowed.
SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons
as shown on page 24 (wrinkle guard, and control
lock).
NOTE: Not all options or modifiers are available on all
cycles. A different chime will sound and the LED will
not come on if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle.
The cycle can be paused at any time either by open
ing the door or by pressing the START/PAUSE button.
If the cycle is not restarted within 4 minutes, the dryer
will shut off and the cycle settings will be lost.
O END OF CYCLE
When the cycle is finished, the chime will sound if it is
set. Remove your clothing from the diyer immediately
to reduce wrinkling. If Wrinkle Guard is selected, the
dryer will tumble briefly every few minutes to help pre
vent wrinkles from setting in the clothes.
19