Kenmore ELITE 796.8051 - Manual (Page 23)

HOW TO USE
CYCLE MODIFIER BUTTONS
Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modifier buttons.
SENSOR DRY cycles are designed to properly care for
specific fabrics and loads. As a result, not all settings are
available for each cycle selection. Refer to page 20 for
details.
MANUAL DRY cycles have default settings, but you may
also customize the settings using the cycle modifier
buttons.
Press the button for the desired modifier until the indicator
light for the desired value is lit.
NOTE: To protect your garments, not every dry level,
temperature, or option is available with every cycle. See
the Cycle Guide on page 20 for details.
High
Medium
Low
Extra Dry
Normal
Damp Dry
Temp
o
(/}
o
60 p Loud
z
UJ
50
1 •
40 1 Soft
30
•
20 1 Off
Chime
é
TEMP CONTROL
Adjusts the temperature setting from LOW to HIGH.
This allows precise care of your fabrics and garments.
Press the TEMP CONTROL button repeatedly to scroll
through available settings.
DRY LEVEL
Selects the level of dryness for the cycle. Press the
DRY LEVEL button repeatedly to scroll through
available settings. Use this button to adjust the dry­
ness of the articles in the load to your preferences.
• This option is not available with MANUAL DRY
cycles.
• The dryer will automatically adjust the cycle time.
Selecting EXTRA DRY or MORE DRY will increase
the cycle time, while LESS DRY or DAMP DRY will
decrease the cycle time.
• Use a LESS DRY or DAMP DRY setting for items
that you wish to iron or hang for final drying.
0
TIMED DRY
Allows you to manually select the drying time in
10-minute increments. Use this cycle for small loads
or to remove wrinkles. Use the MORE TIME/LESS
TIME buttons to increase or decrease the selected
drying time in 1-minute increments.
© CHIME
Adjusts the volume of the chime or turns off the
chime. Press the button repeatedly until the desired
volume is shown on the display.
23