Installing the rôtisserie motor – Kenmore ELITE 141.158033 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Model 141.158033 3/4/5 Burner Grill Rôtisserie:
It is
recommended that you add the extra 6.5" Extension Spit if you
are using Griil Models 16671, 16673 or 16235.
Screw the two Spit sections together using one Spring Washer. Tighten the sections together
using two wrenches. Slide the Holding Forks onto each end of the assembled Rôtisserie Spit. Adjust
spacing between Skewers to accommodate your food, then tighten the Thumbscrews to keep the Food
Skewers in position. Slide the Collar and Bushing onto the threaded end of the Spit. Do not tighten
the Collar Thumbscrew until the Rôtisserie is placed into your grill.
Installing The Rôtisserie Motor
Install the AC (alternating current) Rôtisserie Motor onto the Motor Bracket as shown below. The
Motor attaches to the Bracket with the electrical cord DOWN. This installation ensures that Rôtisserie
Motor is properly installed onto the Motor Bracket.