Kenmore ELITE 141.158033 - Manual (Page 3)

Heavy Duty Rôtisserie Assembiy
instructions
Tools required for assembly:
Adjustable wrench or pliers and either a Flat Head or Phillips Head Screwdriver.
Pre-Assembly Instructions
Before assembling your Rôtisserie, use the parts list beiow to check that ali necessary parts
have been inciuded. Inspect parts for damage as you proceed. Do not assemble or operate
your Rôtisserie if it appears damaged. If you are missing parts or have questions during the
assembly process, cali 1-888-317-7642. 8am - 8pm CST. Monday through Friday.
141.158033
KEY PART DESCRIPTION PART # QTY
1 Motor Bracket P03307002G 1
2 UNC Phillips Head Screws #10-24x3/4” S112G10124 2
3 UNC Hex Nut #10-24 S362G10124 2
4 Plain Washer 3/16" S411G03084 2
5
Chrome Spit: For 4 and 5 Burner P05508164F 1
6.5" Extension Chrome Spit; For 5 Burner Gas Grill P05508166F 1
6 Holding Forks P05508031A 2
7 Thumbscrews 1/4"x1/2" S196G04081 2
8 Collar P05508032F 1
g
Bushing P05508033F 1
10 AC Rôtisserie Motor P07101025A 1
11 Thumbscrews 10x1/2" S196G10084 1
12 Spring Washer for 6.5" Extension Spit S431G04064 1
13 Extension Bracket P03308008C 1
14 Phillips Head Screws 3/8"x1/2" S112G06084 2
15 Phillips Head Screws 3/16"x7/8” S112G03144 2
16 Plain Washer 3/16" S411G03084 2
17 UNC Hex Nut #10-24 S362G10124 2
\ \ \ \ \ \ \
UNC Phillips Head
Screws #10-24x3/4"
KEY #2
Thumbscrews
1/4"x1/2"
KEY #7
Thumbscrews
10x1/2"
KEY #11
Phillips Head Screws
3/8"x1/2"
KEY #14
Phillips Head Screws
3/16"x7/8"
KEY #15
Extension Bracket
KEY #13
If your grill lid overlaps the side of the grill bowl where you would normally mount the rôtisserie
mounting bracket, simply add extension bracket P03308008C to the side of your grill bowl and
then mount the rôtisserie mounting bracket to this extension bracket. See Page 3, Figure 2