Assembling the motor bracket, Assembling the rôtisserie – Kenmore ELITE 141.158033 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Assembling The Motor Bracket

Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the

Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws,

washers and nuts provided. (See fig. 1).

For some Kenmere grills with lid side panels that overlap grill bowl side panels (See fig. 2)

Attach Extension Bracket on the outside of the left grill bowl panel. Align the two holes of the bracket

with the holes en the grill bowl. Tighten securely using two Phillips Head Screws 3/16"x7/8", washer

and nuts provided. Then attach the Motor Bracket to the Extension Bracket using two Phillips Head

Screws 3/8"x1/2" and tighten securely.

Fig 1.

Fig 2.

Assembling The Rôtisserie

Slide the Spit threugh the piece of meat or poultry and the Holding Forks onto each end of

the Rôtisserie Spit. Adjust spacing between Skewers to accommodate your food, then tighten

the Thumbscrews to keep the Food Skewers in position. Slide the Collar and Bushing onto the

threaded end of the Spit. Do not tighten the Coilar Thumbscrew untii the Rôtisserie is piaced

into your grill.