Tones at the end of a timed cycle, Tone volume, Auto recipe™ conversion – GE J7912-30" User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I
I
I'
(A
(
bb
^4
b a k e
)
KITCHEN
TIMER
ON/OFF
)
■/A
iïstart
;:
Tones at the End of a Timed Cycle
At the end of a timed cycle. 3 short beeps will
sound followed by one beep every 6 seconds until
the
CLEAR/OFF
pad Is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
P
i
ess the
BAKE
and
BROIL HiAO
jjads (on double oven models use
the
upper
oven controls) at the same
time for 3 seconds, until the disjrlay
shows
SF.
1
2
Press the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF
pad
again. The display shows
BEEP.
(This cancels the one beep every
6 seconds.)
^ Press the
START
pad.
NOTE:
On double oven models, this cancels the
end-of-cycle tone for both ovens.
c
BROIL
HI/10
BAKE
)
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the
BAKE
and
BROIL HI/LO
jra ds
(on double oven models, use the
upper
oven controls) at the same
time for 3 seconds, until the displa)’
shows
SF.
-J] Press the
OVEN LIGHT ON/OFF
pad.
The disjrlay will show
2 BEEP.
This is
the middle volume level.
Press the
OVEN UGHT ON/OFF
pad
again. The display will show
3 BEEP.
This is the loudest volume level.
Press the
OVEN LIGHT ON/OFF
pad
again. The display will show'
1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to proride an
indication of the volume level.
"Y| Choose the desired sound level
^
[1 BEEP, 2BEEP, 3BEEP).
Press the
START
pad to activate the
desired level show'n.
NOTE:
On double oven models, this activates this
special feature for both ovens.
ÇB
Q)
ss
CÎ.
£2
CD*
0
BROIL
HlilO
BAKE
)
CONVECTION
Q
BAKE
•AUIOaECIPECOmEHSION*
Auto Recipe™ Conversion
When using convection bake, the Auto Recipe“
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures
This feature Is activated so the display
will show the actual converted (reduced)
temperature. For example. If you enter a regular
recipe temperature of 350°F and press the
START
pad, the display will show
CON
and the converted temperature of325°F.
NOTE:
This feature does not convert convection
bake cooking times, only regular baking
temperatures.
To deactivate the feature:
|~^ Press the
BAKE
and
BROIL Hi/LO
pads (on double oven models, use
the
upper
oven controls) at the
same time for 3 seconds, until the
display show's
SF.
2
Press the
CONVECTION BAKE
pad.
The display will show'
CON ON.
Press
the
CONVECTION BAKE
pad again.
The display will show'
CON OFF.
Press the
START
pad.
To reactivate the feature, repeat steps 1-3
above but press the
START
pad when
CON ON
is in the display.