GE J7912-30" - Manual (Page 26)

.O
I
■§
è'
№
Co
.o
'is
u
s
t
2
Od
t
-Si
CO
“Ci
*5
«!
c2
Before You Call For Service...
©
^ » Troubleshooting Tips
^ I Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What To Do
Control signals after
entering cooking time
or delay start You forgot to enter a bake
temperature or cleaning
time.
• Press the BAKE pud and desired temperature or the
SELF CLEAN STD/LOW pud and desired clean time.
Food does not bake
or roast properly Oven controls improperly set. • See the Using the oven section.
Shelf position is incorrect
or the shelf is not level. • See the Using the oven section.
Incorrect cookware or
cookware of improper size
being used. • See the Using the oven section.
Oven floor not in place. • Replace the oven floor.
Oven thermostat needs
adjustment. • See the Adjust the oven thermostat—Do it yourself!
section.
Food does not
broil properly
...........
Oven controls improperly set. • Make sure you press the BROIL HI/LO pad.
Improper shelf position
being used. • See the Broiling Guide.
Food being cooked
in a hot pan. • Use the broiling pan and giid that came Vvith your oven.
Make sure it is cool.
Cookware not suited
for broiling. • Use the broiling pan and giid that came with your oven.
The probe is plugged into the
outlet in the oven. • Unplug and remove the probe from the oven.
Aluminum foil used on the
broiling pan and grid has
not been fitted properly and
slit as recommended.
• See the Using the oven section.
In some areas the power
(voltage) may be low.
• Preheat the broil element f<>r 10 minutes,
• Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer
do not work A fuse in your home may be
blown or the circuit breaker
tripped.
• Replace the fuse or reset the circuit breaker.
Oven controls improperly set. • See the Using the clock, timer and control lockout
section.
Oven light does
not work light bulb is loose or defective. • Tighten or replace the bulb.
Pad operating Ught is broken. • (iall for sendee.
26