Control panel, Stainless steel surfaces (on some models) – GE J7912-30" User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Control Panel
It’s a good idea to \djie the control
panel after each use. Clean with mild
soap and w'ater or vinegar and w'atei;
rinse with clean w'ater and polish dry
with a soft cloth.
Do not use abrasive clea.nsei's, strong
liquid cleansei's, plastic scouring pads or
oven cleaneis on the control panel—they
will damage the finish. A .50/50 solution
of vinegar and hot writer wairks w'ell.
Stainless Steel Surfaces (on some models)
Do not use a steel-wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use Wvirm sudsy writer, a stainless steel
cleaner such as Kleen King® or an
all-purpose liquid or spray cleaner.
.Alw'ays scnib in the direction of the
grain. Rinse thoroughly with a sponge
oi' cloth and clean water. Diy with a soft,
clean cloth.
After cleaning, use a stainless steel
polish, such as Stainless Steel Magic®;
Revere Copper and Stainless Steel
Cleaner® or Wenol ,511 Purpose
Metal Polish/ Follow the product
instructions for cleaning the stainless
steel surface.
0)
25