Replaceable telephone cord, Battery replacement, Product care – GE 2-9720 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BATTERY REPLACEMENT
Battery Safety Precautions
For
your safety, please follow these simple precautions:
• Do not recharge, disassemble, mutilate, wet or dispose of
Battery in fire.
• Keep Battery out of reach of children.
• Replace only with GE Cat. #5-2313. Accessory Order Form
included in this guide.
REPLACEABLE TELEPHONE CORD
The telephone cord (from handset to telephone wall outlet) is actual
ly one cord which is easily replaced if damaged.
SCREW
To replace:
1. Remove modular plug from telephone wall outlet and handset.
2. Remove screw from telephone cord strain relief housing located
on the bottom of the clock radio.
3. Lift off housing and unwrap cord around the strain relief, as in
dicated in the illustration, and replace housing and screw.
To keep your GE Telephone working and looking good, follow these
few simple rules;
PRODUCT CARE
Avoid putting tele
phone new heating
appliances or other
high temperature
sources.
Try to avoid putting
telephone near
heating appliances
and devices that
generate electrical
noise (i.e., motors,
fluorescent tamps).
Telephone should not
be exposed to direct
sunlight or moisture.
Avoid dropping the
Handset as weil as
other rough treat
ment to the phone.
Clean telephone with a
soft cloth dampened
with water. (Remember
to first unplug phone
from wall outlet.)
Never use a strong
cleaning agent or
abrasive powder, as
this will damage the
finish.
Retain the original
packaging, should you
need to ship the phone
at a later date.