GE 2-9720 - Manual (Page 7)

CHAIN DIALING
Allows you to dial in succession a chain of numbers in different
memory locations. This is handy when you must dial more than one
number in memory to complete a call, such as with frequent calls
via an independent long distance service, (e.g. MCI or SPRINT).
For Example:
Memory
Location
Local Access Number of Long Distance Service
and two (or three) Pauses at end............................. is in LZJ
Authorization Code (ID Number).................................. is in CO
Long Distance Phone Number you wish to call... is in
To Initiate Chain Dialing:
I MEMORY DIAL I Cj^ I MEMORY DIAL I I MEMORY DIAL I
Dials # in Dials # in Dials # in
Memory Location 7 Memory Location 8 Memory Location 9
BATTERY REPLACEMENT
A consumer replaceable long-life Lithium Battery (3V) is installed in
the phone to provide back-up power for retaining numbers in memory.
BATTERY REPLACEMENT (cont.)
To Replace Battery:
1. UNPLUG telephone line from
phone wall outlet.
2. UNPLUG handset cord.
3. Use pointed object to remove
telephone number pletstic cover,
card and battery cover to ex­
pose battery holder.
4. Using a small flat screwdriver,
insert in opening at either end
of battery holder and pop up.
5. Slide battery holder out and
dispose of immediately in the
proper manner. (Do Not Touch
Battery).
6. Insert replacement battery and
holder. (Holder can be inserted
only one way.) Snap into place.
7. Replace battery cover, tele­
phone number card, and plastic
cover.
8. PLUG telephone line cord into
phone wall outlet.
9. Connect the coiled cord to the
handset.
10. Reprogram numbers into memory.