Product care, General product care, Changing location of phone cord – GE 2-9710 User Manual
Page 13: E, repiageable telephone cord, Modular plug, Handset, Relief, Clock radio, Housing, Wrap cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRODUCT CARE
To keep your GE Telephone working and looking good, follow these
few simple rules:
• Avoid putting telephone near heating appliances and devices
that generate electrical noise, (i.e., motors, fluorescent lamps.)
•
Telephone should not be exposed to direct sunlight or moisture.
• • Avoid dropping the Handset and other rough treatment to the
phone.
•
Clean telephone with a soft cloth dampened with water.
(Remember to first unplug phone from wall outlet)
« Never use a strong cleaning agent or abrasive powder, as this
will damage the finish.
•
Retain the original packaging for future use.
The telephone line cord (from hsndset to telephone well
outlet) is one cord that can easily change its location. This
convenient feature allows you to change the location of the
cord. Your decision as to the location of the line cord will
depend on where your unit is located in reference to the
telephone outlet.
To remove line cord from current location
1. Remove
MODULAR PLUG
from telephone wall outlet and
HANDSET
/ 1
__________ _ J / t -rt—t r—nti !/~\K i r "
o~rrj A I Kt
nemove
rrom / ci.cr'ncy/vc oo'nL/ o;ny^/iv
RELIEF
housing located on the bottom of the
CLOCK
RADIO.
'
3. Lift off
HOUSING
and unwrap CORD from strain relief.
To move line cord to new location (on other side of hase unit)
1, To install,
WRAP CORD
around the
STRAIN RELIEF
as
indicated and, .feplace
HOUSING
and
SCREW.
■
2. Plug
MODULAR PLUG
back into telephone wall outlet
and
HANDSET.
C.
General
Product
Care
D.
Changing
Location of
Phone Cord
fl
!—
v_
1 CORD
■
I
I
Tha fal^nhnn^ rnrH rfrnm hanri^f^t tn
wall Outlet)
• f.W.
WWW J..W.. ..w.www .w .ww,..-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
-
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
,
is actually one cord which is easily replaced if damaged.
To replace
1. Remove
MODULAR PLUG
from telephone wall outlet and
HANDSET.
2. Remove
SCREW
from
TELEPHONE CORD STRAIN
RELIEF
housing located on the bottom of the
CLOCK
RADIO.
3. Lift off
HOUSING
and unwrap cord from
STRAIN
OC/ /CTCr
/ 1L-L./1»/
.
To install replacement, wrap cord around the strain relief as
indicated and, replace housing and screw.
E, RepiaGeable
Telephone
Cord
............