A installation required clearances, Acceptable electrical outlet area, Installation instructions – GE EER2000 User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Instructions

A Installation Required Clearances

See llustrations below for all rough-in and spacing

dimensions.
The range may be placed with 0” clearance (flush) at
the back wall and side walls of the cabinet.

MINIMUM DIMENSIONS BETWEEN
COOKTOP, WALLS, AND ABOVE THE
COOKTOP.

* Make sure the wall covering, countertop

and cabinets around the range can with
stand the heat (up to 200°F.) generated by
the range.

** Allow 30” Minimum clearance between

surface units and bottom of unprotected

wood or metal cabinet, and 15” Minimum

between countertop and adjacent cabinet
bottom.

*** Recommended spacing to heat sensitive

surfaces.

Acceptable electrical
outlet area.
Orient the electrical

receptacle so the
length is parallel to the floor

*30" MIN

**15" MiN

***011

MIN

^2 1/2"

NOTE: Use a 4 foot power cord to prevent interference

with the storage drawer. Power cords 4.5 or 6 foot long

may have to be dressed to allow for proper drawer closing.