GE EER2000 User Manual
Installation instructions, Parts included, Materials needed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
Instructions
Self Cleaning Free-Standing
Electric Range
EER2000, EER3000 JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP65,
JBP66, JBP67, JBP70, JBP78, JBP79, JBP85, JB940, JB960, JB965
“If you have questions, Call 800-GE-CARES
or visit our website at:
www.GEAppliances.com”
Skill Level: High Average Low
Completion Time: 1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty. See the Owners Manual for warranty
information.
CAUTION: Before you begin
Read these instructions carefully and
completely.
• IMPORTANT- Save these instructions for
local inspector’s use.
• IMPORTANT- Observe all governing codes
and ordinances.
• NOTE TO INSTALLER- Be sure to leave
these instructions with the consumer.
• OWNER- Keep these instructions for future
reference.
• WARNING-This appliance must be
properly grounded.
Parts Included
Anti-Tip Bracket and leg leveler
Materials Needed
I
A ..
'Q®
Lag Bolts Ap|Q|-|Qf- Sleeves
(For C oncrete Floors O nly)
( U L A pproved 40 A M P )
4- Wire Cord
o r
3 -Wire Cord
4’long
4’long
Pub. No. 31-10463
229C4053P447-3
Document Outline
- CAUTION: Before you begin
- Parts Included
- Materials Needed
- IMPORTANT SAFETY INSTRUCTIONS