Dryer belt replacement, Drive belt replacement – Whirlpool Thin Twin User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Dryer Belt Replacement

1. Remove the Dryer Toe Panel.

2. Remove the Lint Filter and the Lint Duct Assembly.

3. Remove the Blower Assembly.

4. Remove the Dryer Front Panel.

5. A new Drive Belt can now be looped over the Dryer

Drum.

(Fig. 27)

6. Loop the Drive Belt over the Drive Motor Pulley.

(Fig. 29)

7. Puli the Tension Pulley up and place the belt on it so that

the belt is tight when the pulley is released.

Drum

Idler Pulley

Motor Pulley

Belt Routing Diagram

Viewed From Front

Direction PartTUrns

Fig. 29