Component access, Washer access, A warning – Whirlpool Thin Twin User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION TWO

COMPONENT ACCESS

A WARNING

Electrical Shock Hazard

«¡i

Disconnect electric power from appliance before servicing.

Replace all panels before operating.

Failure to do so could result in death or electrical shock.

Washer Access

Front Panel Removal

1. Remove the Transition Panel by removing the three (3) retaining screws. Tip the panel down

and lift it out. (Fig.

11)

Transition

Panei

2. Release the two washer top retaining clips and slide the washer top forward off the unit.

(Fig- 12)

Top

Retaining

Clip

Fig. 12

3. Remove the two (2) Washer Front Panei retaining 5/16” screws. Then remove the Front Panel

Brace and remove the Front Panel.

(Fig. 13)

Fig. 13

Front Panel

Top Retaining

Retaining Screws

Ciip