Carl Goldberg GBGA1082 - Manual (Page 3)

3
Caution:
Before starting, carefully go over all high
stress areas with an epoxy or wood glue to
confirm all areas are well glued.
Warnings about Lithium Polymer batteries
NEVER charge Lithium Polymer batteries with a charger designed for
NiCd, NiMH, or any other type of battery chemistry. Use ONLY
the chargers listed under REQUIRES or equivalent substitutes.
Do not allow Li-Po cells to overheat at any time. Cells which reach
greater than 140° Fahrenheit (60C) will usually become damaged and
could catch fire.
Do not charge or discharge Li-Po cells on or near combustible
materials including paper, plastic, carpets, vinyl, leather, wood,
inside an R/C model or full size automobile.
Do not expose Li-Po cells to water or moisture at any time.
Do not store batteries near an open flame or heater.
Do not assemble Li-Po cells or pre-assembled packs together with
other Li-Po cells or packs.
Do not allow a Li-Po battery to be left unattended during charging or
discharging.
Always store Li-Po batteries in a secure location away from children
Always remove a Li-Po battery if model is involved in any kind of
crash. Carefully inspect the battery and connectors for even the
smallest damage. CAUTION, cells may be hot! Do not allow the
electrolyte to get into eyes or on skin. Wash affected areas
immediately if they come into contact with electrolyte