Storing the tire sealant and compressor kit, Tire changing, Storing the tire sealant and – Cadillac 2011 SRX User Manual
Page 427: Compressor kit -89, Tire changing -89
Black plate (89,1)
Cadillac SRX Owner Manual - 2011
Vehicle Care
10-89
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release
button.
3. Pull up and remove the canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
Storing the Tire Sealant
and Compressor Kit
This vehicle may have a tire
sealant and compressor kit in
place of a jack or spare tire. It is
located in a foam container in the
rear compartment storage area.
If the vehicle has a cargo cover,
see Cargo Management System on
page 4‑4 for instructions on how
to access the tire sealant and
compressor kit.
Tire Changing
Removing the Spare Tire and
Tools
To access the spare tire and tools:
1. Open the liftgate. See Liftgate
2. Press on the bottom of the
handle assembly to unlatch it
and lift up on the handle.
The prop rod locks into place
when open.