Back-up lamps, Back-up lamps -45, Vehicle care 10-45 – Cadillac 2011 SRX User Manual

Page 383

Black plate (45,1)

Cadillac SRX Owner Manual - 2011

Vehicle Care

10-45

Back-Up Lamps

To replace one of these bulbs:

1. Open the liftgate. See Liftgate

A. Push Pin

B. Taillamp Cover

2. Pull on push pin (A) to release

the taillamp cover (B).

3. Remove the taillamp cover from

the lamp assembly by pulling
rearward from the top to
unfasten from snap tabs.

4. Remove the two screws from the

taillamp assembly.

5. Pull the taillamp assembly

straight back to remove.

A. Turn Signal Lamp

B. Back–Up Bulb/Socket

6. Disconnect the wire

harness from the back–up
bulb/socket (B).

7. Turn the back–up bulb socket

counterclockwise to remove it
from the taillamp assembly.