Cadillac 2011 SRX User Manual

Page 270

Black plate (2,1)

Cadillac SRX Owner Manual - 2011

8-2

Climate Controls

Automatic Operation

The system automatically controls
the fan speed, air delivery, air
conditioning and recirculation in
order to heat or cool the vehicle
to the desired temperature.

When the indicator light is on,
the system is in full automatic
operation. If the air delivery mode
or fan setting is manually adjusted,
the auto indicator turns off and
displays will show the selected
settings.

To place the system in automatic
mode do the following:

1. Press AUTO.

2. Set the temperature. Allow

the system time to stabilize.
Then adjust the temperature
as needed for best comfort.

English units can be changed
to metric units through the
Driver Information Center (DIC).
See Vehicle Personalization on
page 5‑42.

(Driver and Passenger

Temperature Controls): The
temperature can be adjusted
separately for the driver and the
passenger. Press to increase or
decrease the temperature.

ZONE: Press to link all climate
zone settings to the driver settings.
The ZONE indicator light turns off.
When the passenger settings are
adjusted, the ZONE indicator light
is on.

Manual Operation

(Power): Press to turn the

climate control system on or off.

h i

(Fan Control): Press to

increase or decrease the fan
speed. Pressing either button
cancels automatic operation and
the system goes into manual mode.
Press AUTO to return to automatic
operation.

H G

(Air Delivery Mode Control):

Press to change the direction of the
airflow. The current mode appears
in the display screen. Changing
the mode cancels the automatic
operation and the system goes
into manual mode. Press AUTO
to return to automatic operation.

To change the current mode, select
one of the following:

(Vent): Air is directed to the

instrument panel outlets.

(Bi-Level): Air is divided

between the instrument panel
outlets and the floor outlets.

(Tri‐Level): Air is divided

between the windshield, instrument
panel, and floor outlets.

[

(Floor): Air is directed to the

floor outlets.