Fuses – BMW 2013 X5 User Manual
Page 298
![background image](/manuals/661575/298/background.png)
Battery replacement
Use approved vehicle batteries
Only use vehicle batteries that have been
approved for your vehicle by the manufacturer;
otherwise, the vehicle could be damaged and
systems or functions may not be fully availa‐
ble.◀
After a battery replacement, have the battery
registered on the vehicle by your service center
to ensure that all comfort functions are fully
available.
Charging the battery
Note
Do not connect the charger to the socket
Do not connect the battery charger to the
socket installed in the vehicle at the factory as
this could damage the vehicle.◀
Starting aid terminals
Only charge using the starting aid terminals, re‐
fer to page
while the engine is switched off.
Power failure
After a temporary power loss, some equipment
needs to be reinitialized.
Individual settings need to be reprogrammed:
▷
Seat and mirror memory: store the positions
again, refer to page
.
▷
.
▷
.
▷
Radio station: save again, refer to page
.
▷
Navigation system: wait for the navigation
system to be operational.
▷
Glass sunroof/panoramic glass sunroof: it
may only be possible to raise the roof. Have
the system initialized by the service center.
▷
Digital compass: recalibrate, refer to
page
▷
Active steering: the system automatically in‐
itializes for a short time as you drive. During
this time, the system is deactivated, refer to
page
.
▷
xDrive: the system automatically initializes
as you drive. During this time, indicator
lamps light up. If the lamps do not disappear
during the current trip, have the system
checked.
Disposing of old batteries
Have old batteries disposed of by your
service center or bring them to a recy‐
cling center.
Maintain the battery in an upright position for
transport and storage. Secure the battery so
that it does not tip over during transport.
Fuses
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substitute
of another color or amperage rating; this could
lead to a circuit overload, ultimately resulting in
a fire in the vehicle.◀
Seite 298
Mobility
Replacing components
298
Online Edition for Part no. 01 40 2 901 869 - 03 12 500