BMW 2013 X5 User Manual
Page 290
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is car‐
ried out improperly.◀
Follow the general instructions on lamps and
bulbs, refer to page
.
Parking lamps, roadside parking lamps,
daytime running lights
These lamps are made using LED technology.
Contact your service center in the event of a
malfunction.
Turn signals, front
Follow the general instructions on lamps and
bulbs, refer to page
.
The illustration shows the right side of the en‐
gine compartment.
24-watt bulb, PY24W
1.
Rotate bulb holder to the left and remove it
along with the bulb.
2.
Rotate the bulb to the right along with the
socket and replace.
3.
Install in the reverse order.
Side marker lamps, rear
Contact the service center for bulb replacement.
Fog lamps
Follow the general instructions on lamps and
bulbs, refer to page
.
Contact your service center in the event of a
malfunction.
Tail lamps
▷
Turn signal, brake lamp: 21-watt bulb,
P21W.
▷
Brake force display: 21-watt bulb, P21W.
▷
Backup lamp: 16-watt bulb, W16W
▷
Tail lamp: LED technology.
Contact your service center in the event of a
malfunction.
Arrangement of tail lamps
1 Tail lamp
2 Brake force display
3 Brake lamp
4 Tail lamp/side marker lamp
5 Backup lamp
6 Turn signal
Turn signals, brake lamps and backup
lamps
Follow the general instructions on lamps and
bulbs, refer to page
Seite 290
Mobility
Replacing components
290
Online Edition for Part no. 01 40 2 901 869 - 03 12 500