Blinds Chalet Embassy 2 Macro Aluminum Blinds - Manual (Page 2)

Hanging the Blind
Install the blind by slipping the headrail into the
installation brackets (doors being in the up position).
Making sure the bracket doors are securely locked when
snapped shut.
Attaching the Valance
Attach valance clips to the headrail. Position valance
clips at each slat ladder. Clip the aluminum valance into
the plastic clips that are now attached to the headrail.
Hold Down Brackets
Hold down brackets are available upon request. These
brackets are used to hold the bottomrail of the blind
securely in place. Hold down brackets are commonly
used on French doors and like conditions.
Operation & Care
For protection of furniture and carpeting, slats should be
turned up when closed.
Operation
When raising and lowering the blind, keep the slats tilted
open. To operate the locking mechanism, move the cord
toward the center of the blind. This will unlock the blind,
enabling you to raise and lower the blind. To lock the
blind into the position desired, return the cord to the
vertical position.
Care and Cleaning
Dust with care.
Safety Warning
Parents should know that children could accidently
strangle in window covering cords. Keep all cording on
the front and back of the window covering out of the
reach of children.
It is imperative that a safety cord cleat provided be
installed.
Mini‐Blind Installation Instructions