Crestron electronic TPS-TPI - Manual (Page 36)

Touchpanel Interface Crestron Isys™ TPS-TPI
3. In the Sound Selection dialog box, make sure that the Format field has
PCM selected. If not, select it as shown below.
Select File Format
4. Make sure that the Attributes field has a suitable format (i.e., 8,000 Hz,
8 Bit, Mono) selected. If not, select it as shown below.
Select File Attributes
NOTE: After the format and attributes have been selected, the conversion format
may be saved-as a convenient name such as “TPS Format”.
32 • Touchpanel Interface: Crestron Isys™ TPS-TPI Operations Guide - DOC. 5855