Crestron electronic TPS-TPI - Manual (Page 31)

Crestron Isys™ TPS-TPI Touchpanel Interface
To Convert a WAV File
NOTE: To convert pre-recorded WAV file to an acceptable format, the PC must be
equipped with audio capabilities (i.e., a microphone-input jack, a microphone,
multimedia speakers, and a recording program such as Microsoft Sound Recorder).
The examples in this appendix use Sound Recorder. If another recording program is
preferred, consult the manufacturer’s directions.
NOTE: Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To convert a WAV file, perform the following procedure:
1. At the Windows taskbar, select Start | Programs | Accessories. For
Windows 95/NT, select Multimedia, for Windows 98, select
Entertainment. Select Sound Recorder and the Sound Recorder
opens as shown below.
Open Sound Recorder
2. Select File | Open, browse to the directory or folder that contains the
file to be converted, and open the file.
Open WAV File to Convert
3. Proceed to "Set WAV File or Message Properties, Save, and Exit" on
page 31. To convert another file, follow that procedure to step 9.
Operations Guide - DOC. 5855 Touchpanel Interface: Crestron Isys™ TPS-TPI • 27