Behlen 76078477 - Manual (Page 6)

F-19710-3 Rev. 8-26-03 6-1-01
Step 2
2a. With the corral panel still lying down, assemble the end cee (1) to the shelter posts using
four-½” x 1” hex head bolts (7a) and two-½” nuts (7c). Use the holes indicated on the
illustration. When assembling end cee onto a horse stall, use the holes as indicated in
Detail A.
2b. Assemble the side channel clips (6) to the end cee using two-½” x 1” flat round head
bolts (7b) and two-½” nuts (7c). Be sure to keep the bolt heads to the outside of the cee
as shown. Position the clips in the direction as shown.
7c
(2 req’d. at each
clip location)
7a
(4 req’d. for
each end cee)
6
(4 req’d. for
each end cee)
7b
(2 req’d. at each
clip location)
1
Detail A
7c
(4 req’d. for
each end cee)