Antari F-3 - Manual (Page 6)

6
5. The warm-up time takes around 100 seconds. While the unit is warming up, fog output
will not be possible yet. After warming up, the display will indicate »Ready To Fazer«.
6. With the initial start-up of the machine, keep the button VOLUME at the control panel
pressed for a longer period of time in order to reach maximum fog output volume at
100%, and also to immediately fill the liquid pipe with fog fluid from the tank. Once full
fog output is reached, press the button VOLUME again to stop the fog output.
It is important to repeat this procedure when initializing the machine after transportation
or fluid refills.
Control Panel
FUNCTION
VOLUME TIMER MANUAL
The built-in control panel of the machine features an LCD panel displaying all operation
statuses of the fog machine. The control panel allows the user to customize fog machine
functions by adjusting the fogging duration, interval, and volume as well as the DMX address
and the pump sensor. There are six buttons on the control board. All current operating
ON OFF