Antari F-3 - Manual (Page 10)

10
Pin Function
1 Ground
2 Data-
3 Data+
DMX512 Settings
The F-3 is equipped with a DMX512 system. For connecting a DMX controller, 3-pin and 5-
pin male-female XLR connections are provided. The machine uses two control channels for
adjusting the output volume and the fan speed. Each channel has a DMX value range of 0 to
255. After connecting a DMX controller, timer functions such as output duration and interval
can be programmed using the DMX controller or the DMX control software. In DMX mode, the
machine cannot be controlled via the built-in control panel anymore. By using the DMX
protocol, fog machines, lighting effects, and other special effects machines can be
interconnected and easily controlled.
Channel A Channel B
Output volume Fan speed
6-255 = output
volume control
(2%-100%)
0-5 = off
(no output)
255
0 = 20% speed
0-255=Speed Control
(20% - 100%)
255