Canon VB150 - Manual (Page 15)

Picture Recording User's Guide
Distributing Recorded Pictures
Distributing pictures that have been recorded
If you forward a picture (JPEG) recorded with the Schedule recording function using FTP and
copy it, or remove the flash memory card, download the picture to a PC and embed the picture in
a Web page, you can create a still-picture distribution page.
Distributing pictures in SnapAnimator display format
Pseudo-animations (
→ P.8) are created using the SnapAnimator applet. The following example is
a SnapAnimator description in a HTML source. Customize the description between and to enter the picture in the place you want to paste it.
and
* The underlined text is an IP address. Enter the actual IP address set for the VB150.
Parameter Description
image0
Specifies the URL of the picture file. When specifying multiple picture files,
specify them successively as image1, image2, etc.
Specifies the time at which image0 was taken. Written in the "Y/M/D H:M:S"
format.
■SnapAnimator parameters
time0
The above example was generated using an emum command for the picture search CGI. By using this
description to properly specify the image0 and time0 parameters, you can also create an picture distribution
page that displays any still pictures (JPEG) you have on hand as pseudo-animations. In this case, enter the
time stamp that corresponds with the name of the picture file that you want to display in the double-underlined
portion and enter the imageX and timeX parameters for the number of pictures which you want to display.
code="SnapAnimator.class" archive="SnapAnimator.zip" width=320 height=300>0300/03040507">1000/10100713">0100/01100815"> ...
code="SnapAnimator.class"
archive="SnapAnimator.zip" width=320 height=300>
0300/03040507">
1000/10100713">
0100/01100815">
...
Viewing and Distributing Recorded Pictures
12