Acura 2000 Integra Hatchback - Owner's Manual - Manual (Page 91)

Digital Clock
The digital clock displays the time
with the ignition switch ON (II). To
see the time with the ignition off,
press and hold the wide button next
to the clock.
To set the clock:
1. Turn the ignition switch ON (II) to
display the time.
2. Swing down the front cover of the
wide button next to the clock
display. You will see H, M, and
RESET buttons.
3. Press and hold the H button until
the hour advances to the desired
hour.
4. Press and hold the M button until
the numbers advance to the
desired minutes.
You can use the RESET button to
quickly set the time to the nearest
hour. If the displayed time is before
the half hour, pressing RESET
button sets the clock back to the
previous hour. If the displayed time
is after the half hour, pressing the
RESET button sets the clock for-
ward to the beginning of the next
hour.
For example:
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
Instruments and Controls
M H RESET
Main Menu Table of Contents