Acura 2000 Integra Hatchback - Owner's Manual - Manual (Page 108)

Audio System
AUTO SELECT — If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
To activate Auto Select, press the
A. SEL/RPT button. A. SEL will
flash in the display, and the system
will go into scan mode for several
seconds. It automatically scans both
bands, looking for stations with
strong signals. It stores the frequen-
cies of six AM stations and twelve
FM stations in the preset buttons.
You can then use the preset buttons
to select those stations.
If you are in a remote area, Auto
Select may not find six strong AM
stations or twelve strong FM stations.
If this happens, you will see a "0"
displayed when you press any preset
button that does not have a station
stored.
TUNE BAR
PRESET BUTTONS AUTO SELECT/
REPEAT BUTTON
With Auto Select on, you cannot
manually store any frequencies in
the preset buttons. If you do not like
the stations found by Auto Select,
you can use the TUNE and SEEK
functions to find other stations.
Auto Select does not erase the
frequencies that you preset pre-
viously. When you return home, turn
off Auto Select by pressing the
A. SEL/RPT button. The preset
buttons will then select the fre-
quencies you originally set.
Comfort and Convenience Features
SEEK BAR
Main Menu Table of Contents