beautypg.com

Lights – Acura 2000 Integra Hatchback - Owner's Manual User Manual

Page 214

background image

Lights

2. Undo the seven cover fasteners by

pushing on the center of each
fastener's head until it pops in.
Remove the taillight cover panel.

3. Remove the socket by turning it

one-quarter turn counterclockwise.

4. Try the tail/stoplights and back-up

light to verify which bulb needs
replacing. Remove the bulb by
turning it counterclockwise.

5. Install the new bulb in the socket.

Test it to make sure it works.

6. Reinstall the socket into the light

assembly.

7. Reinstall the tether anchor

hardware.
Make sure the toothed washer is

on the bottom of the bolt. Tighten
the bolt to:

16 lbf.ft (22 N.m , 2.2 kgf.m)

If a torque wrench was not used,
see your Acura dealer as soon as
possible to verify proper
installation.

CONTINUED

Maintenance

Main Menu

Table of Contents