beautypg.com

Lights – Acura 2000 Integra Hatchback - Owner's Manual User Manual

Page 211

background image

Lights

Replacing Front Turn Signal/

Parking and Side Marker Light

Bulbs

1. Use a Phillips-head screwdriver to

loosen the light assembly's
mounting screw.

2. Remove the light assembly from

the bumper.

3. Remove the socket of the burned-

out bulb from the light assembly

by turning it one-quarter turn
counterclockwise.

4. To remove the front bulb, push it

in slightly and turn it counterclock-
wise. To remove the side bulb, pull
it straight out of its socket.

5. Install the new bulb in the socket.

6. Insert the socket back into the

light assembly. Turn it clockwise
to lock it in place.

7. Test the lights to make sure the

new bulb is working.

8. Put the light assembly into the

bumper. Make sure the tab on the
light assembly fits into the bumper

slot. Tighten the mounting screw.

Maintenance

SCREW

Main Menu

Table of Contents