beautypg.com

Drive belts, timing belt – Acura 2000 Integra Hatchback - Owner's Manual User Manual

Page 198

background image

Drive Belts, Timing Belt

Drive Belts

Check the condition of the two or
three drive belts. Examine the edges
of each belt for cracks or fraying.
Check the tension of each belt by
pushing on it with your thumb
midway between the pulleys.

The belts should have the following

"play" or deflection.

Alternator belt:

0.35 — 0.43 in (9.0 — 11.0 mm)

Power steering belt:

0.45 — 0.53 in (11.5 — 13.5 mm)

Compressor belt

(On cars with A/C):

0.30 — 0.37 in (7.5 — 9.5 mm)

If you see signs of wear or looseness,
have your dealer adjust or replace
the belts.

Timing Belt
The timing belt should normally be

replaced at the intervals shown in
the maintenance schedule.

Replace this belt at 60,000 miles (U.S.)
or 100,000 km (Canada) if you
regularly drive your car in one or
more of these conditions:

In very high temperatures

(over 110°F, 43°C).

In very low temperatures

(under — 20°F, — 29°C).

Maintenance

ALTERNATOR BELT

POWER

STEERING

BELT

COMPRESSOR BELT

Main Menu

Table of Contents