beautypg.com

Cooling system – Acura 2000 Integra Hatchback - Owner's Manual User Manual

Page 182

background image

Cooling System

5. Remove the reserve tank from its

holder by pulling it straight up.

Drain the coolant, then put the
tank back in its holder.

6. When the coolant stops draining,

tighten the drain plug at the
bottom of the radiator. Put a new
washer on the drain bolt, then
reinstall the drain bolt in the
engine block. Tighten it securely.

Tightening torque:

58 Ibf.ft (78 N.m , 8.0 kgf.m)

7. Mix the recommended antifreeze

with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:

With 5-speed manual transmission:

(SE, LS, GS)

1.16 US gal (4.4 , 0.97 Imp gal)

(GS-R, Type-R)

1.24 US gal (4.7 , 1.03 Imp gal)

With automatic transmission:

1.24 US gal (4.7 , 1.03 Imp gal)

8. Pour coolant into the radiator up

to the base of the filler neck.

9. Start the engine and let it run for

about 30 seconds. Then turn off

the engine.

CONTINUED

Maintenance

HOLDER

RESERVE

TANK CAP

RESERVE TANK

Fill up to here

FILLER NECK

Main Menu

Table of Contents