Acura 2000 TL - Owner's Manual - Manual (Page 94)

Seat Adjustments
Driver's Lumbar Support
Vary the lumbar support by moving
the lever on the right side of the
seat-back. Pivot the lever forward
until it stops, then let it return. Doing
this several times adjusts the lumbar
support through its full range.
Head Restraints
RELEASE BUTTON
See page 14 for important safety
information and a warning about how to
properly position the head restraints.
The head restraints help protect you
and your passengers from whiplash
and other injuries. They are most
effective when you adjust them so
the back of the occupant's head rests
against the center of the restraint. A
taller person should adjust the
restraint as high as possible.
The front head restraints adjust for
height. You need both hands to
adjust the restraint. Do not attempt
to adjust it while driving. To raise it,
pull upward. To lower the restraint,
push the release button sideways
and push the restraint down.
To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button
and pull the restraint out of the seat-
back.
Instruments and Controls
Main Menu Table of Contents