beautypg.com

Cooling system – Acura 2000 TL - Owner's Manual User Manual

Page 214

background image

Cooling System

11.Start the engine and hold it at

1,500 rpm until the radiator

cooling fan comes on at least twice.
Then stop the engine.

12.Remove the radiator cap. Pour

coolant into the radiator up to the

base of the filler neck and into the

reserve tank up to the MAX mark.

13.Start the engine and hold it at

1,500 rpm until the cooling fan
comes on. Turn off the engine.

Check the coolant level in the

radiator and add coolant if needed.

14.Install the radiator cap, and

tighten it fully.

15.If necessary, fill the reserve tank

to the MAX mark. Install the

reserve tank cap.

Maintenance

Main Menu

Table of Contents